LÜTZE hook and loop adapter | Art.-No.: 380251.0010

LÜTZE supplies the hook and loop adapters in two models: Firstly, for hat profiles and secondly for all profile types of the AirSTREAM wiring system. The hook and loop tapes integrated in the adapters can be used to hold individual or several cables in a clamping range of 8-35 mm without crushing or pinching. The fact that hook and loop tapes can be opened and closed many times without wear make them particularly suitable for retrofitting parts or expanding installations. The LÜTZE hook and loop adapters can, in a few simple steps, be retrofitted to existing control cabinet installations. The hook and loop adapters can be used flexibly and allow vertical or horizontal cable installation. Data cables can now be installed outside the AirSTREAM bracket to ensure separation of the main and control wiring. The hook and loop adapters are made of glass fibre-reinforced polyamide and are self-extinguishing acc. to UL94-V0.

When mounting to the aluminium profiles (MS/ MA bars, RG 035 and the VPSym) of the LÜTZE AirSTREAM wiring frames, the hook and loop adapter is mounted with a clamping foot so that it is parallel to the profile by turning it 45° in a clockwise direction into the groove of the aluminium profile, or crosswise to the profile by turning it 45° in an anti-clockwise direction. This rotating movement guarantees that the cable can be installed both vertically and horizontally.

LÜTZE also supplies a hook and loop adapter that is suitable for mounting on the 35 mm hat profile. The socket can be clipped on with a snap foot without tools.